The following points need to be noted during the use of the milling cutter to make it work better:

1, check the power and stiffness of the machine tool: First of all, you need to check the power and stiffness of the machine tool to ensure that the required milling cutter diameter can be used on the machine tool.
2, the overhang of the tool on the spindle is as short as possible: when installing the milling cutter, the impact of the milling cutter axis and the workpiece position on the impact load should be minimized.
3, the use of the correct milling cutter pitch suitable for the process: in order to ensure that there is not too much blade and workpiece at the same time to cause vibration during cutting, it is necessary to use the correct milling cutter pitch suitable for the process. When milling narrow workpieces or milling cavities, make sure that enough blades are engaged with the workpiece.
4, ensure the use of feed per blade: In order to obtain the correct cutting effect, should ensure the use of feed per blade, so as to reduce tool wear. At the same time, the indexable blade with positive front Angle groove can obtain smooth cutting effect and the lowest power.
5, the selection of suitable for the width of the workpiece milling cutter diameter: the selection of suitable for the width of the workpiece milling cutter diameter can improve the working efficiency of the milling cutter, while avoiding the tool wear caused by the unsuitable milling cutter diameter.
6, the selection of the correct main deflection Angle: the main deflection Angle is an important parameter of the milling cutter, the selection of the correct main deflection Angle can improve the efficiency of the milling cutter, while avoiding the tool wear caused by the improper main deflection Angle.
7, the correct placement of the milling cutter: when placing the milling cutter, the balance and stability of the milling cutter should be ensured to avoid damage to the milling cutter or affect the milling effect due to improper placement.

These are the points that need to be paid attention to when using the milling cutter, and I hope to help you use the milling cutter better.