Ball End Milling Cutter (Cemented Carbide)
18 11月 2021 | 没有评论 | posted by admin | in Article
Main performance: three-dimensional carving, two-dimensional cutting
Applicable material: organic (acrylic) can also be used: black metal
Note: The choice of the blade width of the ball milling cutter mainly depends on the accuracy and size of the surface carving. It is generally divided into two engravings. For rough carving, you can choose a tool with a larger blade diameter, and for fine carving, you should choose a tool with a smaller blade diameter.
Single-edged Column Knife (Cemented Carbide)
17 11月 2021 | 没有评论 | posted by admin | in Article
Main performance: two-dimensional cutting
Applicable material: two-color board, plastic board, also can be used: acrylic thickness under 3MM
Note: For cutting two-color boards, if there is no special requirement, the finished product can be cut with a sharp knife, but it is easy to dull after cutting with a sharp knife, and there will be burrs after engraving. Single-edged column knife, the design principle is the same as that of a sharp knife, but it cuts vertically without slope, which is especially suitable for the design of inlay craftsmanship.
Single-edged Column Knife (Cemented Carbide)
15 11月 2021 | 没有评论 | posted by admin | in Article
Main performance: two-dimensional cutting
Applicable material: two-color board, plastic board, also can be used: acrylic thickness under 3MM
Note: For cutting two-color boards, if there is no special requirement, the finished product can be cut with a sharp knife, but it is easy to dull after cutting with a sharp knife, and there will be burrs after engraving. Single-edged column knife, the design principle is the same as that of a sharp knife, but it cuts vertically without slope, which is especially suitable for the design of inlay craftsmanship.
