3D carving knife (cemented carbide)

Main functions: 3D corner cleaning and chamfering

Applicable material: organic, PVC. Can also be used for: density board, medium hard wood

Notes: whether the engraving is positive or negative, the engraving plane must be kept flat; It is very important to select the appropriate blade width for 3D clear angle carving. It is recommended that the blade width of the small-format engraving machine should not exceed 22MM. The large-format engraving machine can speed up the carving speed by using the appropriate blade width.

Features of aluminum substrate gongs and knives

① The use of ultra-fine grain cemented carbide materials, with good milling, cutting performance, to ensure high efficiency;

② Sufficient bending strength and wear resistance;

③ The groove, hole and plate edge shall be milled and the surface shall be clean, neat and free of burrs.

Single slot straight edge cutter (cemented carbide)

Main performance: 2D cutting

Applicable materials: softwood, medium density and medium hardness wood. It can also be used for: elastic, anti friction plastic

Features: The slotting design and single edge geometric design are combined to facilitate the automatic removal of debris during rapid cutting.