Single-edge left-hand down cutter: a highly efficient tool in the machining industry.

27 12月 2023 | 没有评论 | posted by admin | in Article

The characteristics of the single edge left-hand down milling cutter mainly include the following points:

1, high cutting efficiency: Because there is only one cutting edge of the single-edge left-hand down cutting cutter, radial force will not be generated during the cutting process, thereby improving the cutting efficiency.
2, high cutting accuracy: because of the special structure of the single-edge left-turn down milling cutter, the cutting amount of each cutting edge is uniform, so the size of the cut material is more accurate.
3, the cutting force is small: the cutting force of the single-edge left-turn down milling cutter is mainly concentrated on the cutting edge, so the cutting force is small, which can reduce the impact on the machine tool and the tool.
4, a wide range of applications: single-edge left-turn down milling cutter is suitable for the processing of various materials, such as cast iron, steel, etc., and can be used for roughing and finishing.
5, long service life: Because the cutting edge of the single-edge left-turn down milling cutter uses special materials and heat treatment process, its service life is long.

To sum up, the single-edge left-hand downcut milling cutter has the advantages of high efficiency, high precision and low cost, so it has been widely used in the machining industry.

Selection and application of milling cutter edge length.

26 12月 2023 | 没有评论 | posted by admin | in Article

When it comes to the blade length of the milling cutter, we need to understand its impact on the machining process. First of all, the blade length refers to the length of the cutting edge of the milling cutter, which determines the amount of metal that the milling cutter can remove during the machining process. Different edge lengths lead to different cutting resistance and cutting effects.

The shorter blade length makes the milling cutter more flexible and suitable for cutting softer metal materials. Due to the smaller cutting resistance, the milling cutter can be more easily controlled, thereby reducing machining errors and improving machining accuracy. In addition, the heat generated by the short-edge milling cutter during the processing is also relatively small, which can reduce the error caused by thermal deformation.

However, a longer blade length is suitable for cutting harder materials. Because of the increased cutting resistance, the long-edge milling cutter can provide more cutting force, thus cutting more metal. In addition, the cutting depth of the long edge mill is greater, and the machining process can be completed more quickly.

In addition to cutting resistance and cutting effect, the number of milling cutter blades will also have an impact on the machining process. Two-point milling cutters are usually used for roughing, while three-point milling cutters are more suitable for finishing. The cutting edge of the three-edge mill is longer and the chip generated by each cutting edge is smaller, which reduces the cutting force and improves the finish of the machined surface.

To sum up, choosing the right milling cutter blade length and blade number is crucial to improve machining efficiency and machining quality. In practical applications, the appropriate milling cutter needs to be selected according to the specific processing requirements and material characteristics. In addition, in order to obtain better machining results, the machining process can also be optimized by adjusting cutting parameters and using cutting fluid.

If you need more information about the length of the milling cutter, you can consult Guangzhou Jiefeng Tool Co., Ltd. to get help.

Double-edge composite edge milling cutter: an efficient and high-precision machining tool.

23 12月 2023 | 没有评论 | posted by admin | in Article

Double-edge composite edge milling cutter is a commonly used milling cutter, and its characteristics mainly include the following aspects:

1. Efficient processing: The double-edge composite edge milling cutter has two blades, which can be used for cutting and milling at the same time to improve processing efficiency.
2. High processing accuracy: the cutting edge of the double-edge composite edge milling cutter is finely ground and polished to ensure processing accuracy and surface roughness requirements.
3. Wide range of application: the double-edge composite edge milling cutter can be applied to the processing of a variety of materials, such as steel, cast iron, aluminum alloy, etc., and is suitable for the processing of different shapes such as plane, slope, groove, etc.
4. Good stability: double-edge composite edge milling cutter is made of high-strength material, with good vibration resistance and cutting stability, to ensure the stability and reliability of the processing process.
5. Long life: the cutting edge of the double-edge composite edge milling cutter is specially treated and has a long service life, which can reduce production costs and improve production efficiency.

In short, the double-edge compound edge milling cutter has the characteristics of high efficiency, high precision, wide application range, good stability and long life, and is one of the commonly used tools in machining.