er chuck

12 5月 2021 | 没有评论 | posted by admin | in Article

It is a cylindrical fixture used to confine drilling and tapping tools or milling tools on the spindle of a drilling, tapping, milling machine or machining center. It is also called an ER collet. It can also be used to fix and reinforce a fixed locking device that needs to be modified and processed.

ER spring chuck has large clamping force, wide clamping range and good accuracy. It is widely used in boring, milling, drilling, tapping, grinding and engraving.

ER chuck is a kind of collet chuck, generally used in conjunction with CNC tool holders

Diamond drill bit

8 5月 2021 | 没有评论 | posted by admin | in Article

The drill bit is an integrated drill bit, the whole drill bit has no moving parts, the structure is relatively simple, and it has high strength, high wear resistance and impact resistance. It is one of the three new drilling technologies in the world in the 1980s. Field use has proved that when drilling in soft-medium-hard formations, diamond bits have the advantages of high speed, large footage, long life, stable work, fewer downhole accidents, and good well quality. Diamond drill bits are not only used for a long time, but can also be reused. The use effect of the returned diamond drill bit is similar to that of the factory diamond drill bit, which can save a lot of drilling costs.

Acrylic carving tool

6 5月 2021 | 没有评论 | posted by admin | in Article

Applicable materials: acrylic, PS, PVC, high and medium density board, plastic, resin, wood, and other soft materials.

Features: fast speed, non-sticky chips, high efficiency

Precision cutting of the acrylic surface can achieve a mirror effect, and the transmittance (such as plexiglass, acrylic, light guide plate, crystal block) can achieve the effect of surface polishing, eliminating the need for traditional polishing processes.

1. Acrylic cutting processing, single-edged spiral milling cutter engraving knife is recommended. It is characterized by smokeless and odorless processing, fast speed, high efficiency, non-sticky chips, and truly environmentally friendly. Its special manufacturing process ensures that acrylic is not processed. Burst, very fine knife pattern (even no knife pattern), smooth and smooth surface. The machined surface needs to achieve a frosted effect. It is recommended to use a double-edged three-edged spiral milling cutter.

2. For MDF cutting processing, it is recommended to use a double-edged large chip-ejecting spiral milling cutter. It has two high-capacity chip flutes and a double-edged design, which not only has a good chip removal function, but also achieves a good tool balance. When processing medium and high-density boards, it has the characteristics of no blackening, no smoking, and long service life.