Down milling and up milling
29 6月 2021 | 没有评论 | posted by admin | in Article
Most surface milling is done by up-milling on light-duty machine tools with lead screws or ball screws. However, down milling should be used as much as possible to achieve better processing results. Because when up-milling, the blade produces strong friction before cutting, which causes the machined surface to harden, making it difficult for the next tooth to cut. When down milling, the milling width should be approximately equal to 2/3 of the diameter of the milling cutter. This ensures that the cutting edge can cut into the workpiece immediately, with almost no friction. If it is less than 1/2 the diameter of the milling cutter, the insert begins to “friction” the workpiece again, because the cutting thickness becomes smaller when cutting in, and the feed per tooth will also be reduced due to the narrowing of the radial cutting width. The result of “friction” shortens the tool life. For cemented carbide tools, it is more advantageous to increase the feed per tooth and reduce the depth of cut. Therefore, during rough milling, if the radial cutting width is smaller than the radius of the milling cutter, increasing the cutting amount will increase the tool life and shorten the machining time. Of course, finishing milling requires a smooth surface of the workpiece, so the amount of cutting should be limited
Jade carving knife
28 6月 2021 | 没有评论 | posted by admin | in Article
It is used for engraving, scribing, embossing, engraving yin and yang characters on the flat, spherical, concave surface of various jade, glass, porcelain and other objects. The depth of the pattern and the round, flat, and sharp bottom can be controlled at will, so that the processed The product has a three-dimensional effect of knives.
Single flute spiral knife (carbide)
24 6月 2021 | 没有评论 | posted by admin | in Article
Main function: two-dimensional cutting
Applicable materials: Acrylic, PVC, MDF
Features: Combining the advantages of single groove design with strong cutting force and smooth chip evacuation, and spiral blade cutting ensures the smoothness of the cut surface. It has excellent work efficiency in batch processing of PVC and MDF.
