Tungsten steel blade
14 9月 2021 | 没有评论 | posted by admin | in Article
Tungsten steel blades are made of tungsten steel. Tungsten steel is an alloy material made of hard compounds of refractory metals and bonding metals through powder metallurgy.
Tungsten steel has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance and corrosion resistance, especially its high hardness and wear resistance, which remain basically unchanged even at a temperature of 500°C. It still has a high hardness at 1000°C.
The difference between two-flute milling cutter and three-flute milling cutter — different precision requirements:
13 9月 2021 | 没有评论 | posted by admin | in Article
1. The size of the keyway milled by the two-edge milling cutter can reach high precision, and the end face of the keyway milling cutter has no center hole, and it can be directly fed downwards, instead of the ordinary three-edge milling cutter due to the center. The center hole can not be directly fed downwards.
2. The keyway milling of the end mill of the three-flute milling cutter can’t reach the precision of the keyway milling cutter. When these two types of milling cutters are milling, there is no difference in the three elements of milling.
The difference between two-flute milling cutter and three-flute milling cutter—the two functions are different:
10 9月 2021 | 没有评论 | posted by admin | in Article
1. The two-edged milling cutter is a keyway milling cutter. The keyway milling cutter is named after the keyway milling cutter. It is a fixed-size prop. If it enters the tool directly, it will be held up by the center hole and break Knife accident. Instead, the knife can only be entered from the side, or while the knife is moving, the knife can be entered.
2. The three-flute milling cutter is an ordinary end mill, and the outer diameter of the milling cutter does not have the same precision requirements as the keyway milling cutter.
