If the diameter becomes larger, the distance between the three blades is larger each time, the frequency of milling is different from that of the four blades, the vibration impact is also different, and the same feed rate is one more blade milling chip, it is easier to divide the thickness of the iron chip per blade. In addition, the chip removal performance of the three-edged edge of the same diameter is better than that of the four-edged edge, considering the material to be cut, the milling process (end milling, side milling, spiral milling, etc.), the milling allowance, etc., and the three-edged edge is convenient for chip removal. , 4-blade wear-resistant.

This article was written by: admin

发表评论 取消回复

邮箱地址不会被公开。 必填项已用*标注

Let us know what you have to say:

Your Name *

Your Email *

在此浏览器中保存我的姓名、电子邮件和站点地址。