1. It requires the spindle of the machine tool to have large power and high rotation speed to satisfy the rough and fine processing.
2. The rapid feed of the machine tool does not require high-speed travel. However, it must have a relatively high processing feed rate (30~60m/min) and high acceleration/deceleration.
3, the rapid feed of the machine tool does not require high speed travel. However, it must have a relatively high processing feed rate (30~60m/min) and high acceleration/deceleration.
4. Select CAD/CAM software for high-speed machines, especially for high-speed cutting tools.

This article was written by: admin

发表评论 取消回复

邮箱地址不会被公开。 必填项已用*标注

Let us know what you have to say:

Your Name *

Your Email *

在此浏览器中保存我的姓名、电子邮件和站点地址。