1, corn cutter, also known as corncob cutter, also known as squamous milling cutter, the surface is dense spiral mesh pattern, the slot is relatively shallow, are generally used for some functional materials such as material processing, in particular Like some carbon fiber Kafra materials (like the wing of the aircraft’s wing like) fiberglass and other composite materials! The Solid carbide scale cutter, cutting edge is composed of many cutting units, cutting edge sharp, which greatly reduces the cutting resistance, and can achieve high-speed cutting, to achieve the effect of milling and grinding, improve the composite material Processing efficiency and surface quality, extending the life of the cutter.
2, Wave edge cutter. It is in the ordinary high-speed steel end mill on the basis of the spiral rake face, with a special milling fixture to the spiral rake face and then processed into a wave-shaped spiral surface, it is combined with the flank face cutting edge. The peak width of the adjacent two corrugations is shifted by a certain distance from the axis to reduce the cutting width significantly, and the actual cutting thickness of the cutting edge is about three times larger, and the cut chips are narrow and thick, reducing the degree of cutting deformation and The cutting edge is cut into the workpiece by avoiding the surface hardened layer. The edge of the cutting edge of the cutting edge of the blade angle, the working angle and bear the cutting load are not the same. And the wave edge of the same end section of the pitch is not the same. These factors greatly reduce the cyclical nature of the cutting force changes, so that the cutting process is more stable. Milling of gas cutting steel and other rough surface of the workpiece, wave edge cutter in particular can show its excellent cutting performance.
3, the blade cutter is a spiral cutter, the so-called corn cutter, generally refers to the cutter cutter, and the so-called spiral blade refers to the overall type of cutter. The general corn cutter is suitable for large deep hole machining, while the spiral cutter is suitable for all kinds of face milling, side milling and complex imitation milling.

This article was written by: admin

发表评论 取消回复

邮箱地址不会被公开。 必填项已用*标注

Let us know what you have to say:

Your Name *

Your Email *

在此浏览器中保存我的姓名、电子邮件和站点地址。